倉庫用貨物用エレベーター1500kg
video
倉庫用貨物用エレベーター1500kg

倉庫用貨物用エレベーター1500kg

レール-タイプのリフト貨物エレベータのドアには、リフティングブラケット、ドア、カーゴボックス、およびカーゴボックスをリフティングブラケットに対して上下にスライドさせるための牽引駆動装置が含まれています。 コンパートメントドアとカーゴコンパートメントは別々に配置されており、...
お問い合わせを送る
説明

vertical lift platform

hydraulic lift

レール-タイプのリフト貨物エレベータのドアには、リフティングブラケット、ドア、カーゴボックス、およびカーゴボックスをリフティングブラケットに対して上下にスライドさせるための牽引駆動装置が含まれています。 コンパートメントドアとカーゴコンパートメントは別々に配置されており、コンパートメントドアにスライド可能に接続されるコンパートメントドアブラケットも含まれています。 コンパートメントドアブラケットは、リフトブラケットの上部の外側にあります。 スライドレールのシュート内に配置され、スライドレールに対してスライド可能で、コンパートメントドアの下部にストップレバーが水平方向に内側に伸びており、ストップレバーはカーゴコンパートメントと連携して配置されています。 リフト貨物エレベータのドアブラケットには固定ロッドも含まれており、ドアブラケットは固定ロッドを介してリフトブラケットの外側に固定されています。 貨物用エレベータのドアには、正方形のフレームと、正方形のフレーム内に固定された金網が含まれています。 貨物用エレベータシュートは、スライドレールの長さに沿って配置され、スライドレールの端の近くにあります。

It is used to drive the freight elevator door to slide up and down relative to the lift bracket. A traction drive device is installed, including a door bracket that is slidably connected to the door. The freight elevator's door bracket is located on the outer side of the upper part of the lift bracket. The two sides of the compartment door are respectively located in the chute of the slide rail and can slide relative to the slide rail, the bottom of the compartment door is horizontally extended inwardly with a stop bar, and the stop bar is arranged in cooperation with the cargo compartment. Specifically, the gear lever is used for the lift of the cargo box to drive the door, that is, the cargo box lifts and lowers the door by leaning against the gear lever, the door is separated from the cargo box, and there is no connection relationship. The lift truck of the traction drive device realizes the lifting and lowering of the door by lifting and lowering the cargo box. In order to optimize the structure, the car door includes a square frame and a wire mesh fixed in the square frame, that is to say, the car door is a plate-like structure, not two symmetrical opening and closing car doors. Moreover, the chute is arranged along the length of the sliding rail and is close to the end of the sliding rail, and the bottom of the sliding rail is flush with or slightly lower than the floor where the cargo box reaches the floor. Generally speaking, this type of lift freight elevator is used in workshops, which are usually steel double-layer platform structures, that is, the bottom of the slide rail is set slightly lower than the upper platform.

cargo lifthoistfreight elevatorfreight liftsharbor freight liftselevatorhoist lifterstackersstacker

人気ラベル: 倉庫、中国、メーカー、サプライヤー、工場、カスタマイズ、購入、安い、販売、中国製の貨物用エレベーター1500kg

お問い合わせを送る

(0/10)

clearall